Tilting Hoister attached with Auto-crane
It is installed on the automatic billet shift machine, the moving
and lifting is rely on auto-crane. The lifting is guide by the
guidance frame. It has the advantages of stable, accurate, no
excursion, no shaking. It is a special hoister to open, assemble
the mould and demould.
The tilting hoister (see the picture) is a match equipment for
autoclaved aerated concrete cutting machine.
The hydraulic station supplies the oil to the turning cylinder to
make the clamp device turn 900 and the clamp arm turn left means to
tighten and loose when turn right.
The hydraulic station supplies the oil to the tilting cylinder when
the hanger is lifting and pushes the pistol to tilting the
mould.Clamp and loose The hanger lift the slide wheel on the cross
beam, and the guide device on the vertical beam moves down.
The vehicle moving to make the hanger goes and returns along the
Go up and down
The tilting hoister has the functions of moving, lifting, turning,
clamping side plate and de-mould.
MovingThe tilting hoister is composed of beam, guide device, turning
device, lifting device, side panel
clamp, loose device and hydraulic station. The beam is made of rectangle steel
pipe with good rigidity,
simple structure and it is easy to install and adjust. The hydraulic station,
lifting device, side panel clamp
and loose device is placed on the top of the cross beam and the turning device is place
on the vertical
locking oil cylinder
mould locking oil cylinder
Length:7955mm width:1193mm height:according to stroke
weight:~3800kg driving system
- hydraulic station(please see the instruction)
- titling oil cylinder
max dimensions Technical parameter
The tilting hoister has 2 functions.
Lifting the mould with cake and side plate to the air after
pre-curing, tilting 90 degree (the cake is vertical) and then
lifting to the cutting cart, open the mould and demould, remove the
mould, the cake are prepared for cutting. The mould after removed
from the cake assemble with the side plate and then tilting 90
degree in the air and put in the return track, again it is ready